The Pad Deployment Tool (PDT-GA) is the mandrel used to deploy the Compensated Neutron Pad (CNP) and the Lithology Density Pad (LDP). The PDT can be configured to run in the eccentric mode to prevent caliper collapse in deviated wells. Caliper assembly is included.
|Pressure||20,000 PSI||1,379 bar|
|Temperature||325° F||163° C|
|Weight||160 lbs||72.5 kg|
|Tool Length||9.72 ft||2.96 m|
|Transport Length*||11.53 ft||3.51 m|
|Tool OD||4.84 in||12.29 cm|
* From end of top thread protector to end of bottom thread protector.
|Caliper||0.2 in||0.5 cm|
|Caliper (PDT)||4.8 – 22 in||12.2 – 56 cm|
|Maximum Logging Speed||60 ft/min||18.3m/min|
|Caliper||±0.2 in||±5.1 mm|
|Minimum||6.0 in||15.2 cm|
|Maximum (PDT)||18 in||45.72 cm|
Using jigs with known inside diameters of 6 and 12 inches, calibrate the calipers.
Open, cased, fluid- or air-filled holes; oil or salt-based muds.